Like any other machinery, hair clippers need constant and periodic maintenance and servicing in order for them to work in an effective manner.
The maintenance can be done by the use of cleaning and repairing materials. In terms of mechanical maintenance, you would need to use a screw driver to open the blades and rectify them. Blades can be rectified first of all by sharpening. After some period of usage, you would discover that the blades may start to get blunt and worn out. Sharpening would bring them back in shape and enable them to offer good service. The other way you could rectify the cutting blades is by replacing them with brand new blades or alternative ones. This would be the case especially when the current blades are so much worn out to the extent which they cannot be sharpened anymore.
When you have opened the hair clipper to either sharpen or change the blades, it is important to maintain cleanliness at this level; you would need to wipe off the hairs that are inside the machine by use of a hand brush. Doing this would not only keep the machine clean but also improve its performance. Hair stuck in the machine may cause clogging and thus disrupt the performance in general. When you do that, you may as well remember to use a sanitizer in cleaning the blades so that you can wipe out all the germs that may be present from regular usage.
Oiling is yet another very important maintenance practice for the clippers. Oiling would help the parts of the clipper that move to move freely and easily. It would also reduce the noise produced by the machine and help the machine to cut more precisely. This process can be done after the cleaning process has been completed and would include dropping the oil on the teeth of the clipper blades and on each of the moving sides. You should also be careful not to pour excess oil as this would then attract hair and dust thus clogging the machine. You can therefore wipe off excess oil form the machine after the application.
Again there are some clippers which have a problem of getting too hot during usage. Such clippers could burn the user and thus this would need to be controlled. Luckily enough there is a remedy for this as you can easily use a special cool care clipper spray that would cool down the clipper machine thus lowering the temperature. This liquid spray is very important because it has other functions. In addition to cooling the clipper, this spray can lubricate, disinfect and clean the machine in totality.
In short, you can maintain your clippers by careful and proper use. You should avoid using the clippers in a manner in which they are not supposed to be used so that you can avoid damaging it. If you are not well versed with the usage, you should first learn personally by going through the manual or with the help of a professional. You should also read the review of the hair clippers at websites like Trustedbeasts and then make a decision.