Nail guns are automatic tools, which eject nails to construction materials with excessive force. Are you working on a building project or large-scale remodeling project? If yes, then a nail gun is definitely a necessary tool.
To ensure you get the most out of your best framing nailer, use the following tips:
#1: Always wear your safety gear
When a nail gun strikes a surface, it may send splinters flying. Therefore, it’s always prudent to put on safety goggles and face mask to protect yourself. On top of that, use a protective cover to protect your ears. Sturdy boots and thick gloves should also be handy. To be on the safe side, work in a well-lit, slip-proof, and clear area.
#2: Always familiarize yourself with the tool
While nail guns are simple tools, you must handle them with utmost care. Hundreds of workers tend to be injured annually due to misfired nails. You should strictly purchase a tool, which meets the needed safety standards. Prior to using your tool, keenly and thoroughly pass through the instruction manual. Familiarize yourself with the basic parts and safety features of the tool.
#3: Always observe your surroundings
Anytime you fire your nail gun, it might break through the material and then hit someone that’s on the other side. Avoid firing a nail gun on any concealed surface before confirming that it’s safe to do so. Furthermore, always notify your co-workers when you’re about to start.
#4: Always hold your nail gun properly
The other thing you must avoid doing is carrying your nail gun against your body. This is because an accidental trigger might send nails flying hence causing serious injury. Additionally, be extremely cautious not to disconnect the gadget and then carry it away from the body whenever you climb ladders. What’s more is the fact that you should refrain from touching the trigger whenever you’re carrying the nail gun. Ensure that it is always switched off and unplugged. Moreover, the safety catch must always be in place before you transport the tool.
#5: Always avoid pointing your nail gun at anybody
To use your nail gun efficiently and safely, you must avoid distractions and conversations when using it. Avoid turning around when operating the tool. Your free hand must always be out of the line of fire.
#6: Always unplug your tool prior to performing maintenance
Anytime you want to perform routine maintenance or cleaning, you must always disconnect or switch off your nail gun first. It is prudent to take it to an uncluttered and clear area where there’s plenty of light. The nails you use must be free from rust at all times.
#7: Always refrain from using your nail gun around combustibles
Using your nail gun around combustibles is a recipe for disaster. In fact, using any power tool within the vicinity of any combustible material is highly risky. That is because it can give off sparks, which can start a fire.
#8: Always ensure the nailing surface is safe
Some surfaces might be concealing gas pipes or electric lines. Prior to firing a nail gun at a surface, it’s prudent to ensure that it’s safe to do so.
#9: Always move carefully
Do you intend to move in a line as you’re firing a nail gun? If that is the case, then you should always make a point of starting an edge and then move inwards. By doing that, you will always avoid falls … What is more is that you must refrain from walking backward when you are firing the nail gun. Begin at the back as you move forward.
#10: Always store your tools safely
You should always keep your nail gun away from folks that aren’t trained to use it. Secondly, store it safely along with other tools in a dry area.
There is no doubt that nail guns are necessary when it comes to renovation or construction needs. They reduce the energy and time that’s needed to ‘hammer’ nails to doors, walls, etc. Determining the kind of nails to use with the nail gun and how to use it efficiently and safely can be challenging to many people. However, by following the above tips, you should be on the safe side.
Jose A. Brown is a mechanic engineer and an enthusiastic blogger whose mission is to provide the readers with the best tips, guides in the Home Improvement, DIY Project, and Industry.